|Version 17 (modified by Niels Slot <nielsslot@…>, 2 years ago)|
The GPL (and other FOSS) sources from Archos have been checked into git for convenient patching and access:
Notes for current Angstrom build on Gen8
* join #openaos on FreeNode? irc for help
enable speakers with toggle in alsamixer (to the right) export SDL_AUDIO_DRIVER=alsa in case SDL apps aren't defaulting to it.
Larger onscreen keyboard
cd /usr/share/xkbd lrwxrwxrwx 1 root root 26 Dec 21 18:06 en_US.qwerty.xkbd -> en_GB.qwerty.tabletpc.xkbd lrwxrwxrwx 1 root root 26 Dec 21 18:06 en_GB.qwerty.xkbd -> en_GB.qwerty.tabletpc.xkbd
/etc/network/interfaces # Ethernet/RNDIS gadget (g_ether) # ... or on host side, usbnet and random hwaddr iface usb0 inet static pre-up rmmod musb_hdrc pre-up modprobe musb_hdrc mode_default=2 pre-up modprobe g_ether address 192.168.0.202 netmask 255.255.255.0 network 192.168.0.0 gateway 192.168.0.200 First bring up tablet usb0 interface, then pc/laptop should appear. Before disconnecting cable, ifdown usb0 on tablet.
Control tablet with PC keyboard and mouse
install synergy client on tablet with: opkg install synergy install synergy server on PC/laptop set -use_cursor to yes in /etc/matchbox/session configure synergy on server: http://synergy2.sourceforge.net/configuration.html start synergys on PC/laptop ssh to archos and start synergy client with synergyc -f [your.server.ip.addr]
Kernel module released at http://gitorious.org/archos/archos-gpl-gen8/trees/master/hardware/ti/wlan/wl1271 Download the above mentioned sources. cd .../hardware/ti/wlan/wl1271/platforms/os/linux Now setup your environment by editing wl_env.bash or do it manually on the commandline in my case it was: export CROSS_COMPILE=/usr/src/gen8/buildroot/build_arm/staging_dir/usr/bin/arm-linux- export ARCH=arm export HOST_PLATFORM=zoom2 export KERNEL_DIR=/usr/src/gen8/buildroot/linux/ Then type make and wait a few minutes and you are done. The tiwlan_drv.ko will appear in .../hardware/ti/wlan/wl1271/platforms/os/linux This gives you only the module. I am still looking at how the tiwlan_loader needs to be compiled.
More info can also be found http://omappedia.com/index.php?title=Wilink_Linux&redirect=no
echo ondemand /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor (throttle mhz back from 1ghz when not needed - be kind to your CPU)
echo 100 > /sys/devices/platform/omap_pwm_led.0/leds/lcd-backlight/brightness (values from 0-255 are accepted)
PowerVR SGX OpenGLES 3D
The Android kernel that is used with the SDE already contains a pvrsvrkm module. This module is incompatible with the driver this guide installs. In order to use 3D in Angstrom (or any other X11 Linux) you'll need to remove it. To do that, simply recompile the kernel without the module. You can do this be either disabling the module in the kernel config, or by removing it from the source.
Next you'll need to download the SGX driver from TI. You can find the driver on http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/latest/index_FDS.html At the time of writing, the latest version is Graphics_SDK_setuplinux_4_03_00_02.bin
Run the .bin file on a x86 (or x86-64) machine. This will run a setup which will extract the required files to a directory of your choosing. In the new directory, you'll find some files and folders. Two of these folders are important:
- gfx_rel_es5.x - This folder contains the user space libraries that we'll be using
- GFX_Linux_KM - This folder contains the sources for the kernel module
The kernel module requires two changes to be able to build with the Archos .29 kernel.
In services4/3rdparty/bufferclass_ti/bc_cat.c around line 606. Make sure the 'width_align' variable always gets a value of 8. The 'cpu_is_omap3530()' function isn't defined in the Archos kernel, so this line will fail to compile. Simply statically defining 'width_align' to 8 works fine.
In services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c correct the includes for the display.h file. This file should be included as <mach/display.h> and not as <plat/display.h>
You'll probably also need to make some changes to the build scripts to get the module to build. I hard coded my kernel directory in the Makefile. I also made sure that the CORE variable is always the one for revision 125 (the revision in the Archos Gen8). In Kbuild I replaced the occurrences of TI_PLATFORM with 'omap3630'. These two hacks might not be required. If someone finds a cleaner way, please add to this page.
The module should now build and you'll end up with three .ko files (one in the root directory, two in other directories)
The gfx_rel_es5.x folder contains a nice install.sh script that can be used to install the graphics libraries. Without modification the script will also try to install the build modules. I just wanted it to copy the required library files so I made some small changes. I removed lines 194 to 224 and lines 247 to 250 (basically the lines that deal with the kernel module installation). I then created a new directory 'root' and ran "sudo ./install.sh --root root --no-x --no-display --no-bcdevice". This will copy and install the required libraries and user space programs.
Copy both sets of files, the modules and the user space libs, to the device (or to the rootfs image). The modules should be in /lib/modules/2.6.29-omap1/kernel/drivers/gpu (you'll need to create the gpu directory). Make sure to run 'depmod -a' after you placed them there.
The user space libs can be copied to their place on the device filesystem. Most of the binaries in '/usr/local/bin' aren't required, copying only 'pvrsrvinit' is enough. All files in '/usr/lib' and the rc.pvr init script are required though. While you're copying stuff to the device, also copy a OpenGLES demo from the SDK directory. For example OGLES2Coverflow in GFX_Linux_SDK/OGLES2/SDKPackage/Binaries/X11/Demos/Coverflow/ can be nice as a demo, but you're free to pick any others. As long as they're for X11.
Now, reboot the device in text-only mode (for example by removing the symlink to the startup script of your DM, but changing run-level should also work :) Run the following two commands:
- fbset -nonstd 0 -depth 16
- /etc/init.d/rc.pvr start
If fbset isn't installed, first install it. Make sure you have the real version of fbset. The busybox version could cause problems.
After you run the fbset command, the text in the console should change from blue to white. The rc.pvr should not display any errors. You can now check with 'lsmod' if the pvr module is inserted.
If everything so far is OK, start X (for example by starting you DM). In X, open up a terminal and start the demo application you copied to the device. It should now show a window with 3D graphics.
working cflags: -O3 -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -ffast-math -fsingle-precision-constant
On screen kernel messages at boot up
- Remove or comment out the 'gunzip -c $BOOT_IMAGE > /dev/fb0' line in init.sh of the initramfs. - Set the 'console' kernel command line option to 'console=tty1'. (See CONFIG_CMDLINE* kernel config) NOTE: Kernel messages will disappear after the initramfs is done since bootsplash starts.
A list of other efforts to get Linux distributions to run on Gen8.
- http://forum.xda-developers.com/showthread.php?t=1000081 - Debian on the 101IT
- https://wiki.kubuntu.org/ARM/Archos101it - Kubuntu on the 101IT
- Debian gen8 - building a debian rootfs.img for the angstrom kernel from SDE
TODOs (help wanted!)
- mount /mnt_data writeable by user - wifi module and configuration - fix gpe Mini Web Browser - fix gpe applet for setting screen brightness - get hardware-scaled framebuffer (overlay) on lcd - switch to conservative speed governor and shorter dimming timeout when running off battery - opkg repository for archos-gen8 - fix microphone input - get oprofile running with debug / symbol info - FunAndGames: PocketSNES - FunAndGames: pcsx-rearmed - FunAndGames: picodrive - FunAndGames: dosbox (dynamic recompiler) with improved mouse support